This replacement model for the CRF65-4096G4096C22 is developed as a true 1:1 alternative, maintaining the original 4096×4096 multi-turn absolute resolution and parallel signal output. All critical installation parameters—including shaft type, flange dimensions, housing profile, mounting depth, and connector layout—are matched precisely to ensure direct drop-in installation. No mechanical rework or control-system changes are required, making it well suited for users dealing with discontinued supply or extended procurement cycles. Typical production lead time is 10–15 working days.
The replacement model has been implemented by users across Southeast Asia, the Middle East, Brazil, Russia, and Ukraine. It is recognized for its stable multi-turn feedback, solid mechanical durability, and consistent long-term performance. Common applications include CNC equipment, industrial automation systems, wind power installations, and heavy-duty material-handling machinery where reliable absolute position feedback is essential for continuous operation.
Technical data
| Parameter | Value |
| Electrical data (Valid for all versions unless otherwise stated) | |
| Sensor system | GaAlAs diode, photo-transistor array, precision comparator |
| Parallel output circuits | A = Open collector, C = Darlington, D = Push pull |
| Serial outputs | Differential output to RS422 |
| SS/ ASA | Differential (opto-coupler) for data driver RS 422 |
| Parity bit | Check bit (not to RS - 22 Bit) |
| Error bit output | Data Bit (parallel and SS/ 32 Bit only) |
| Enable circuit for bus operation | Active or inactive |
| Multifunctional inputs (MFP) | Signal input 6 |
| Memory circuit (latch) | Through MFP |
| Code sense | CW or CCW |
| Supply voltage range | 11 to 26 VDC |
| Supply current | 80 mA typ. / 120 mA max. |
| Data rate | 1 to 3 kHz, depending on programming (parallel interface only) |
| Measurement position deviation | ≤ ± 238' (for 4096 pos. / 360°) |
| Disc coding | Gray code |
| Setting cycles EEPROM | ≤ 10^6 |
| Mechanical data | |
| Operating speed | 3000 rpm max. (continuous), 4000 rpm max. (short period) |
| Operating torque | 5 Ncm min. (at 1000 rpm) |
| Wind-up torque | ≤ 10 Ncm (4 Ncm - CRF 66) |
| Angular acceleration | 10^6 rad/s^2 max. |
| Inertial mass of rotor | 50 gcm^2 |
| Permissible axial and radial shift load | 250 N max. |
| Bearing life expectancy | 10^6 turns |
