For the GM400.0121102 and GM400.A121102 variants, we offer a fully compatible SSI encoder 1:1 replacement engineered to meet demanding industrial requirements. The replacement mirrors the functional behavior and electrical interface of the original units, ensuring seamless substitution during maintenance or system upgrades.
The encoder provides absolute multiturn position feedback via SSI, combining accurate singleturn measurement with reliable multiturn tracking. Its design supports stable sampling performance and consistent signal timing, making it well suited for motion control applications that require precise synchronization and repeatable positioning.
Mechanically, the encoder conforms to established industrial mounting conventions, allowing installation without mechanical modification. The robust construction supports operation in environments subject to vibration, shock, and electrical interference. Integrated self-diagnostic functions continuously monitor internal processes and signal integrity, supporting preventive maintenance and improving overall system availability.
This replacement solution is ideal for industrial automation, positioning systems, and machinery that depend on accurate absolute position feedback and dependable long-term performance.
Technical data
| Parameter | Value |
| Supply voltage | 10...30 VDC with reverse voltage protection |
| Current consumption | Max. 50 mA (w/o load) for 24 VDC |
| SSI pulse frequency | 62.5 kHz up to 1.5 MHz |
| Mono-flop time | 20 μs |
| Pulse space | Min. 25 μs |
| Code switching speed for sampling | 800 kHz |
| Deviation of sampling measuring step | 0.025 degree at 400 kHz 0.05 degree at 800 kHz |
| Electric connector | The electric connector must not be plugged on or removed whilst under voltage. |
| Parameter | Value |
| RPM value | mechanical: Max. 10,000 RPM electrical: Max. 6,000 RPM |
| Anlauf-Drehmoment | w/o seal (IP54): < 0.010 Nm with seal (IP65): < 0.015 Nm |
| Shaft loading | axial: < 20 N radial: < 40 N |
| Inertia torque | 2 x 10⁻⁶ kgm² |
| Material | Housing: Steel Flange: Aluminium |
| Weight | Approximately 400 g |
| Parameter | Value |
| Ambient temperature | -20...+60 °C |
| Storage temperature | -20...+70 °C |
| Protection to | Shaft w/o seal: IP 54 Shaft with seal: IP 65 |
| Relative humidity | Max. 95 %, non-condensing |
| Endurance - Vibration | IEC 68 Section 2 - 6 (≤100 m/s² / 16-2000 Hz) |
| Endurance - Shock | IEC 68 Section 2 - 27 (≤2000 m/s² / 6 ms) |
| Interference immunity | EN 50082-2 EN 61000-4 - 2 to 4 Severity grade 3 |
| Emmited interference | EN 50081-2 |
