We can provide a customized replacement solution for the PMG10-SHD.13P0.30000.A Profibus-DP absolute encoder, designed to match the original unit’s communication interface and functional requirements. This replacement is engineered for installation in existing Profibus-DP networks without changes to PLC configuration or fieldbus parameters, making it suitable for maintenance spares, system upgrades, and retrofit applications.
This encoder delivers absolute multiturn position feedback through a Profibus-DP interface with RS485 signaling. It supports reliable data exchange across industrial control systems and can be parameterized for preset values, scaling, and rotational direction to align with diverse automation requirements. The design emphasizes consistent position reporting and stable bus communication under typical industrial electrical conditions.
The customized replacement is suited for motion control systems requiring accurate absolute feedback on Profibus-DP networks, such as servo drives, material handling lines, and automated production equipment.
Technical Data
| Parameter | Specification |
| Voltage supply | 10...30 VDC |
| Short-circuit proof | Yes |
| Consumption w/o load | ≤200 mA |
| Initializing time | ≤ 500 ms after power on |
| Interface | Profibus-DPV0/V2 |
| Function | Multiturn |
| Transmission rate | 9.6 ... 12000 kBaud |
| Device address | Rotary switches in bus connecting box |
| Steps per revolution | 8192 / 13 bit |
| Number of revolutions | 65536 / 16 bit |
| Additional outputs | Square-wave TTL/HTL, TTL/RS422 |
| Sensing method | Magnetic |
| Interference immunity | EN 61000-6-2 |
| Emitted interference | EN 61000-6-3 |
| Programmable parameters | Steps per revolution, Number of revolutions, Preset, scaling, rotating direction |
| Diagnostic function | Position or parameter error |
| Status indicator | DUO-LED (bus connecting box) 4 LEDs in device back side |
| Approval | CE, UL approval / E217823 |
| Parameter | Specification |
| Size (flange) | ø115 mm |
| Shaft type | ø11 mm solid shaft |
| Flange | EURO flange B10, Housing foot B3 |
| Protection EN 60529 | IP 66 / IP 67 |
| Operating speed | ≤6000 rpm |
| Range of switching speed | ns (off) = ±2...6000 rpm |
| Operating torque typ. | 10 Ncm |
| Rotor moment of inertia | 1 $kgcm^2$ |
| Admitted shaft load | ≤450 N axial, ≤650 N radial |
| Material | Housing: aluminium alloy; Shaft: stainless steel |
| Corrosion protection | IEC 60068-2-52 Salt mist for ambient conditions CX (C5-M) according to ISO 12944-2 |
| Operating temperature | -40...+85 °C |
| Relative humidity | 95 % non-condensing |
| Resistance | Vibration: IEC 60068-2-6 (30 g, 10-2000 Hz) Shock: IEC 60068-2-27 (400 g, 1 ms) |
| Weight approx. | 2.7 kg (depending on version) |
| Connection | Bus connecting box, Terminal box incremental |
