We can provide a customized replacement solution for the PMG10-SHD.12UG.36000.G absolute multiturn encoder with SSI interface, engineered to match the original unit’s electrical characteristics, SSI communication behavior, and functional performance. This customized encoder is designed for direct integration into existing motion control and automation systems without modifications to PLC logic, SSI timing parameters, or wiring layouts.
The PMG10-SHD series delivers high-resolution absolute position feedback via a Synchronous Serial Interface (SSI), offering stable multiturn measurement for demanding industrial applications such as servo drives, rotary tables, and automated material handling systems. With robust RS422 signal drivers and deterministic data exchange, the replacement maintains reliable communication even in electrically noisy environments. Programmable features—including preset positions, scaling options, and selectable rotation direction—allow flexible adaptation to different controller requirements and machine dynamics.
Designed for industrial operation, this replacement emphasizes signal integrity, repeatability, and long-term performance, supporting continuous duty and high-usage cycles typical of modern production equipment. Its optimized electrical and communication interface ensures compatibility with standard SSI controllers and motion architectures. This customized replacement solution provides a practical option for maintenance, retrofit, or equipment modernization where precise absolute position feedback is essential and original units are no longer available.
Technical Data
| Parameter | Specification |
| Voltage supply | 4.75...30 VDC |
| Short-circuit proof | Yes |
| Consumption w/o load | ≤100 mA (SSI) |
| Initializing time | ≤ 500 ms after power on |
| Interface | SSI |
| Function | Multiturn |
| Steps per revolution | 1048576 / 20 bit |
| Number of revolutions | 1048576 / 20 bit |
| Additional outputs | Square-wave TTL/HTL, TTL/RS422 |
| Sensing method | Magnetic |
| Code | Gray or binary |
| Code sequence | CW (factory setting) |
| Input signals | SSI clock, PRESET, rotating direction |
| Interference immunity | EN 61000-6-2 |
| Emitted interference | EN 61000-6-3 |
| Diagnostic function | Function control |
| Status indicator | 4 LEDs in device back side |
| Approval | CE, UL approval / E217823 |
| Parameter | Specification |
| Size (flange) | ø115 mm |
| Shaft type | ø11 mm solid shaft |
| Flange | EURO flange B10, Housing foot B3 |
| Protection EN 60529 | IP 66 / IP 67 |
| Operating speed | ≤12000 rpm |
| Range of switching speed | ns (off) = ±2...12000 rpm |
| Operating torque typ. | 10 Ncm |
| Rotor moment of inertia | 1 $kgcm^2$ |
| Admitted shaft load | ≤450 N axial, ≤650 N radial |
| Material | Housing: aluminium alloy; Shaft: stainless steel |
| Corrosion protection | IEC 60068-2-52 Salt mist for ambient conditions CX (C5-M) according to ISO 12944-2 |
| Operating temperature | -40...+95 °C |
| Relative humidity | 95 % non-condensing |
| Resistance | Vibration: IEC 60068-2-6 (30 g, 10-2000 Hz) Shock: IEC 60068-2-27 (400 g, 1 ms) |
| Weight approx. | 1.9 kg (depending on version) |
| Connection | Terminal box, Flange connector M23 |
