We provide a 1:1 replacement model for the CRF58-4096G4096A14 parallel absolute encoder, engineered to fully replicate the original multi-turn resolution, parallel output structure, and installation configuration. All critical mechanical dimensions, electrical characteristics, and interface definitions are reproduced to ensure seamless integration into existing systems. This approach allows direct installation without parameter changes, rewiring, or control system adjustments, helping users overcome supply limitations while maintaining precise absolute position feedback.
This replacement model has been applied in industrial and automation projects across Southeast Asia, the Middle East, South America, Russia, and Ukraine. Users report stable signal output, dependable multi-turn performance, and consistent quality in long-term operation. With a standard production lead time of 10–15 working days, it offers a practical and cost-effective solution for machinery, automated lines, lifting equipment, and other demanding industrial environments.
Technical data
| Parameter | Value |
| Electrical data (Valid for all versions unless otherwise stated) | |
| Sensor system | GaAlAs diode, photo-transistor array, precision comparator |
| Parallel output circuits | A = Open collector, C = Darlington, D = Push pull |
| Serial outputs | Differential output to RS422 |
| SS/ ASA | Differential (opto-coupler) for data driver RS 422 |
| Parity bit | Check bit (not to RS - 22 Bit) |
| Error bit output | Data Bit (parallel and SS/ 32 Bit only) |
| Enable circuit for bus operation | Active or inactive |
| Multifunctional inputs (MFP) | Signal input 6 |
| Memory circuit (latch) | Through MFP |
| Code sense | CW or CCW |
| Supply voltage range | 11 to 26 VDC |
| Supply current | 80 mA typ. / 120 mA max. |
| Data rate | 1 to 3 kHz, depending on programming (parallel interface only) |
| Measurement position deviation | ≤ ± 238' (for 4096 pos. / 360°) |
| Disc coding | Gray code |
| Setting cycles EEPROM | ≤ 10^6 |
| Mechanical data | |
| Operating speed | 3000 rpm max. (continuous), 4000 rpm max. (short period) |
| Operating torque | 5 Ncm min. (at 1000 rpm) |
| Wind-up torque | ≤ 10 Ncm (4 Ncm - CRF 66) |
| Angular acceleration | 10^6 rad/s^2 max. |
| Inertial mass of rotor | 50 gcm^2 |
| Permissible axial and radial shift load | 250 N max. |
| Bearing life expectancy | 10^6 turns |
