For discontinued or long lead-time CE58-1000EA03 parallel absolute encoders, we provide a precision 1:1 custom solution engineered for seamless replacement. The encoder strictly follows the original housing dimensions, shaft structure, mounting interface, and parallel data output specifications. It enables direct installation into existing systems without PLC reconfiguration or mechanical modification, reducing retrofit risks and lowering total replacement costs in industrial automation projects.
With a controlled production cycle of approximately 15 working days, this solution supports urgent maintenance requirements and small-batch non-standard customization. Each unit is subjected to comprehensive electrical calibration and environmental reliability testing to ensure stable signal transmission under continuous industrial workloads. It is suitable for positioning equipment, automated production lines, and heavy-duty machinery requiring accurate and dependable parallel absolute feedback.
Technical data
| Sensor system | GaAlAs diode, photo-transistor array |
| Parallel outputs circuits A | Open collector Darlington |
| Parallel outputs circuits B | Open collector, TTL compatible |
| Parallel outputs circuits C | Open emitter Darlington |
| Supply voltage range | +10.5 V to 26.5 VDC |
| Supply current | 50 mA |
| Output frequency | 30 kHz max. |
| Measurement position deviation | 10° |
| Disc coding | 10 bit |
| Code sense | Gray code or Gray-Excess (CW or CCW selectable by connecting MSB or LSB) |
| Enable circuit (for bus operation) | Active or inactive (Signal input ET) |
| Operating speed (continuous) | 3000 rpm max. |
| Operating speed (short period) | 4000 rpm max. |
| Inertial mass of rotor | 35 gcm² |
| Operating torque | ≤ 1 Ncm |
| Wind-up torque | ≤ 0.2 Ncm |
| Permissible axial and radial shaft load | 100 N |
| Bearing life expectancy | 10⁸ revolutions |
| Operating temperature range | -5°C to +60°C |
| Storage temperature range | –25°C to +70°C |
| Resistance to shock | 200 m/s², 11 ms |
| Resistance to vibration | 5 Hz ... 1000 Hz; 100 m/s² |
| Protection | IP 65 when used with the supplied connector cover |
| Mass | 240 g |
