For discontinued or hard-to-procure CE58-1024GB05 parallel absolute encoders, we provide a 1:1 custom solution engineered for precise system replacement. All key parameters, including mounting dimensions, shaft configuration, wiring layout, and parallel signal output, are strictly matched to the original specification. The encoder can be installed directly into existing equipment without control program modification, helping reduce retrofit complexity and overall replacement cost.
With a standard lead time of approximately 15 working days, this solution effectively addresses urgent maintenance demands and supports small-batch non-standard production. Each unit is validated through electrical accuracy and stability testing to ensure reliable operation in continuous industrial environments. It is particularly suitable for automation systems, positioning machinery, and heavy-duty equipment requiring stable and accurate parallel absolute feedback.
Technical data
| Sensor system | GaAlAs diode, photo-transistor array |
| Parallel outputs circuits A | Open collector Darlington |
| Parallel outputs circuits B | Open collector, TTL compatible |
| Parallel outputs circuits C | Open emitter Darlington |
| Supply voltage range | +10.5 V to 26.5 VDC |
| Supply current | 50 mA |
| Output frequency | 30 kHz max. |
| Measurement position deviation | 10° |
| Disc coding | 10 bit |
| Code sense | Gray code or Gray-Excess (CW or CCW selectable by connecting MSB or LSB) |
| Enable circuit (for bus operation) | Active or inactive (Signal input ET) |
| Operating speed (continuous) | 3000 rpm max. |
| Operating speed (short period) | 4000 rpm max. |
| Inertial mass of rotor | 35 gcm² |
| Operating torque | ≤ 1 Ncm |
| Wind-up torque | ≤ 0.2 Ncm |
| Permissible axial and radial shaft load | 100 N |
| Bearing life expectancy | 10⁸ revolutions |
| Operating temperature range | -5°C to +60°C |
| Storage temperature range | –25°C to +70°C |
| Resistance to shock | 200 m/s², 11 ms |
| Resistance to vibration | 5 Hz ... 1000 Hz; 100 m/s² |
| Protection | IP 65 when used with the supplied connector cover |
| Mass | 240 g |
