The CR58-1024G19A01 parallel absolute encoder is available through our custom replacement program with a typical production lead time of 10 working days, supporting predictable scheduling for maintenance projects and system modernization. This solution is developed to match existing installation conditions while maintaining full electrical compatibility. Mechanical interfaces, shaft dimensions, cable orientation, connector styles, and mounting structures can be adapted according to on-site requirements, ensuring seamless integration into current automation equipment without altering control logic or rewiring systems.
Technically, the encoder operates on a parallel absolute output architecture, delivering stable multi-bit position data suitable for real-time motion control and synchronized automation processes. Its optical sensing system ensures consistent measurement accuracy, reliable repeatability, and resistance to signal drift over extended operation. The reinforced industrial housing is engineered to withstand vibration, oil exposure, and fluctuating temperature environments commonly found in manufacturing facilities. This model is widely applied in packaging machinery, printing systems, automated assembly lines, and specialized production equipment where accurate angular feedback directly influences product quality, synchronization precision, and long-term operational reliability.
Technical data
| Parameter | Value |
|---|---|
| Resolution | 2 to 4096 positions / 360° |
| Measuring range | 2 to 4096 turns |
| Total number of positions | |
| Measurement position deviation | |
| Output frequency* | 30 kHz max. up to 10 Bit / 360°; 10 kHz max. from 11 Bit |
| Disc coding | Gray code |
| Output code, parallel | Gray or Natural Binary |
| Code sense, serial | CW or CCW (Signal input E2) |
| Logic polarity | Positive |
| Memory circuit | Store or not store, signal input E1 |
| Enable circuit (for bus operation) | Active or inactive, (signal input E1) |
| Sensor system | GaAlAs diodes, photo-transistor array |
| Parallel output circuits | A = Open collector Darlington; B = Open collector, TTL compatible; C = Open emitter Darlington; D = Push-pull, Totem-pole |
| Serial output SSI | Differential data output to RS 422 |
| Clock input SSI | Differential (opto-coupler) for data driver to RS 422 |
| Supply voltage range | +11 V to +26 VDC |
| Supply current | Parallel: 90 mA typ. / 120 mA max.; Serial GSI: 130mA typ. / 160mA max. |
| Operating speed | 3000 rpm max. (continuous); 4000 rpm max. (short period) |
| Angular acceleration | 10° rad/s² max. |
| Inertial mass of rotor | ≤ 5 Ncm (8 Ncm - CR 66) |
| Wind-up torque | ≤ 1 Nm (4 Ncm - CR 66) |
| Permissible axial and radial shaft load | 250 N max. |
| Bearing life expectancy | 10⁹ revolutions |
| Operating temperature range | -20°C to +60°C |
| Storage temperature range | -25°C to +70°C |
| Permissible rel. humidity | 85% without condensation |
| Resistance to shock | 200 m/s², 11 ms (DIN IEC 68) |
| Resistance to vibration | 5 Hz..1000 Hz; 100 m/s² (DIN IEC 68) |
