For the GM400.0102102 and GM400.A102102 variants, we offer a fully compatible SSI encoder 1:1 replacement designed to meet demanding industrial motion control requirements. The replacement follows the same interface logic and operational characteristics as the original units, ensuring a smooth transition during maintenance or retrofit projects.
Using a Synchronous Serial Interface, the encoder provides absolute multiturn position information with high resolution and repeatability. Consistent signal timing and reliable data integrity support accurate real-time feedback in applications that require precise synchronization between encoder and controller. The design is optimized for stable operation across typical industrial operating speeds.
From a mechanical perspective, the encoder aligns with common mounting conventions, enabling installation without mechanical redesign. Its robust construction supports use in environments exposed to vibration, shock, and electrical interference. Integrated self-diagnostic functions continuously monitor internal status and signal quality, helping operators reduce unplanned downtime and improve system availability.
This replacement solution is ideal for industrial automation systems, positioning equipment, and machinery that depend on accurate absolute position feedback and dependable long-term operation.
Technical data
| Parameter | Value |
| Supply voltage | 10...30 VDC with reverse voltage protection |
| Current consumption | Max. 50 mA (w/o load) for 24 VDC |
| SSI pulse frequency | 62.5 kHz up to 1.5 MHz |
| Mono-flop time | 20 μs |
| Pulse space | Min. 25 μs |
| Code switching speed for sampling | 800 kHz |
| Deviation of sampling measuring step | 0.025 degree at 400 kHz 0.05 degree at 800 kHz |
| Electric connector | The electric connector must not be plugged on or removed whilst under voltage. |
| Parameter | Value |
| RPM value | mechanical: Max. 10,000 RPM electrical: Max. 6,000 RPM |
| Anlauf-Drehmoment | w/o seal (IP54): < 0.010 Nm with seal (IP65): < 0.015 Nm |
| Shaft loading | axial: < 20 N radial: < 40 N |
| Inertia torque | 2 x 10⁻⁶ kgm² |
| Material | Housing: Steel Flange: Aluminium |
| Weight | Approximately 400 g |
| Parameter | Value |
| Ambient temperature | -20...+60 °C |
| Storage temperature | -20...+70 °C |
| Protection to | Shaft w/o seal: IP 54 Shaft with seal: IP 65 |
| Relative humidity | Max. 95 %, non-condensing |
| Endurance - Vibration | IEC 68 Section 2 - 6 (≤100 m/s² / 16-2000 Hz) |
| Endurance - Shock | IEC 68 Section 2 - 27 (≤2000 m/s² / 6 ms) |
| Interference immunity | EN 50082-2 EN 61000-4 - 2 to 4 Severity grade 3 |
| Emmited interference | EN 50081-2 |
