We can provide a customized replacement solution for the PMG10-SHD.12UG.32000.G absolute multiturn encoder with an SSI interface. This replacement is engineered to match the original encoder’s electrical behavior, SSI communication timing, and feedback characteristics, enabling drop-in integration into existing motion control systems without the need for changes to PLC programs, communications settings, or hardware configurations.
The PMG10-SHD series delivers absolute position feedback via a Synchronous Serial Interface (SSI), enabling precise multiturn position data for high-performance industrial applications. This model is tailored for systems that require dependable feedback in dynamic environments, providing consistent signal transmission through robust RS422 driver stages and well-defined SSI timing. Programmable functions, including preset values, scaling, and selectable rotational direction, allow flexible adaptation to specific controller logic and application requirements.
Designed for demanding industrial environments, the replacement solution emphasizes signal reliability, repeatability, and long-term operational stability. Its electrical and communication interface is optimized to maintain consistent performance under continuous machine operation, making it suitable for servo axes, indexing tables, automated handling systems, and precision positioning equipment requiring stable multiturn absolute feedback. This customized replacement offers a practical option for maintenance, retrofit, or expansion projects where the original unit is no longer available.
Technical Data
| Parameter | Specification |
| Voltage supply | 4.75...30 VDC |
| Short-circuit proof | Yes |
| Consumption w/o load | ≤100 mA (SSI) |
| Initializing time | ≤ 500 ms after power on |
| Interface | SSI |
| Function | Multiturn |
| Steps per revolution | 1048576 / 20 bit |
| Number of revolutions | 1048576 / 20 bit |
| Additional outputs | Square-wave TTL/HTL, TTL/RS422 |
| Sensing method | Magnetic |
| Code | Gray or binary |
| Code sequence | CW (factory setting) |
| Input signals | SSI clock, PRESET, rotating direction |
| Interference immunity | EN 61000-6-2 |
| Emitted interference | EN 61000-6-3 |
| Diagnostic function | Function control |
| Status indicator | 4 LEDs in device back side |
| Approval | CE, UL approval / E217823 |
| Parameter | Specification |
| Size (flange) | ø115 mm |
| Shaft type | ø11 mm solid shaft |
| Flange | EURO flange B10, Housing foot B3 |
| Protection EN 60529 | IP 66 / IP 67 |
| Operating speed | ≤12000 rpm |
| Range of switching speed | ns (off) = ±2...12000 rpm |
| Operating torque typ. | 10 Ncm |
| Rotor moment of inertia | 1 $kgcm^2$ |
| Admitted shaft load | ≤450 N axial, ≤650 N radial |
| Material | Housing: aluminium alloy; Shaft: stainless steel |
| Corrosion protection | IEC 60068-2-52 Salt mist for ambient conditions CX (C5-M) according to ISO 12944-2 |
| Operating temperature | -40...+95 °C |
| Relative humidity | 95 % non-condensing |
| Resistance | Vibration: IEC 60068-2-6 (30 g, 10-2000 Hz) Shock: IEC 60068-2-27 (400 g, 1 ms) |
| Weight approx. | 1.9 kg (depending on version) |
| Connection | Terminal box, Flange connector M23 |
