A custom replacement solution is available for the CBE58-4096GKC11 encoder, developed to provide full compatibility with the original unit while addressing supply and cost challenges. This alternative is engineered according to the original mechanical outline, mounting interface, and electrical specifications, allowing direct installation without changes to the control system. It is especially suitable for maintenance projects, legacy equipment support, and applications affected by long procurement cycles.
The replacement encoder delivers stable high-resolution feedback and is designed for reliable operation in harsh industrial environments. Through flexible non-standard customization, specific connector types, output formats, and small-batch requirements can be supported. Compared with conventional sourcing, this solution helps significantly reduce total ownership cost and shortens delivery time. In most cases, customized production can be completed within approximately 15 working days, enabling faster recovery of production lines and improved equipment availability.
Technical data
| Sensor system | GaAlAs diodes, photo-transistor array |
| Resolution | 4096 positions / 360°; 8192 positions / 360° (optional); 3600 positions / 360° (optional) |
| Data Control - Bit (DCB) | Optional at ≤ 4096 positions |
| Disc coding | Gray or Gray - Excess |
| Measuring position deviation | ≤ ± 2'38'' at 4096 positions / 360°; ≤ ± 1'59'' at 8192 positions / 360° |
| Parallel output circuits | A = Open Collector Darlington; C = Open Emitter Darlington; D = Push - pull |
| Output frequency | 10 kHz max. |
| Latch | via signal input E1 |
| Enable circuit | on / off, via signal input E1 |
| Serial output circuit | E = SSI Differential to RS 422 / 485 |
| Output Code | Gray or Gray - Excess for non - binary outputs |
| Code sense | CW or CCW, via signal input E2 |
| Supply voltage range | +11 VDC to +30 VDC |
| Supply current (parallel) | 50 mA typ. / 70 mA max. |
| Supply current (serial SS) | 60 mA typ. / 80 mA max. |
| Operating speed | 3000 rpm max. (continuous); 4000 rpm max. (short period) |
| Angular acceleration | 10⁵ rad/s² max. |
| Inertial mass of rotor | 45 gcm² |
| Operating torque | ≤ 5 Nm (8 Nm - CBE 66) (at 1000 rpm) |
| Wind - up torque | ≤ 1 Nm (4 Nm - CBE 66) |
| Permissible axial and radial shaft load | 250 N max. |
| Bearing life expectancy | 10⁹ turns |
| Mass | 0.5 kg |
