This replacement solution for the CRF65-4096G4096C03 is developed to fully match the original encoder’s 4096×4096 multi-turn resolution and parallel output structure. All mechanical and electrical details—including shaft interface, flange dimensions, housing profile, mounting depth, and connector layout—are reproduced to ensure true plug-and-play installation. It is intended for users facing sourcing difficulties or extended lead times while needing to maintain stable absolute position feedback. Standard production and delivery are completed within 10–15 working days.
The replacement has been widely implemented across the Middle East, Southeast Asia, Brazil, Russia, and Ukraine. Customers recognize its reliable multi-turn accuracy, solid mechanical durability, and consistent signal stability in continuous operation. It is well suited for CNC machinery, automated production lines, wind energy equipment, and heavy-duty material-handling systems, providing dependable absolute feedback in demanding industrial environments.
Technical data
| Parameter | Value |
| Electrical data (Valid for all versions unless otherwise stated) | |
| Sensor system | GaAlAs diode, photo-transistor array, precision comparator |
| Parallel output circuits | A = Open collector, C = Darlington, D = Push pull |
| Serial outputs | Differential output to RS422 |
| SS/ ASA | Differential (opto-coupler) for data driver RS 422 |
| Parity bit | Check bit (not to RS - 22 Bit) |
| Error bit output | Data Bit (parallel and SS/ 32 Bit only) |
| Enable circuit for bus operation | Active or inactive |
| Multifunctional inputs (MFP) | Signal input 6 |
| Memory circuit (latch) | Through MFP |
| Code sense | CW or CCW |
| Supply voltage range | 11 to 26 VDC |
| Supply current | 80 mA typ. / 120 mA max. |
| Data rate | 1 to 3 kHz, depending on programming (parallel interface only) |
| Measurement position deviation | ≤ ± 238' (for 4096 pos. / 360°) |
| Disc coding | Gray code |
| Setting cycles EEPROM | ≤ 10^6 |
| Mechanical data | |
| Operating speed | 3000 rpm max. (continuous), 4000 rpm max. (short period) |
| Operating torque | 5 Ncm min. (at 1000 rpm) |
| Wind-up torque | ≤ 10 Ncm (4 Ncm - CRF 66) |
| Angular acceleration | 10^6 rad/s^2 max. |
| Inertial mass of rotor | 50 gcm^2 |
| Permissible axial and radial shift load | 250 N max. |
| Bearing life expectancy | 10^6 turns |
