This OEM replacement for the DAF58-12A14 is engineered as a true 1:1 customized alternative, precisely matching the original 0–20 mA absolute output curve and shaft configuration. Mechanical dimensions and electrical behavior are aligned to support direct installation without fixture changes or control system adjustments. By optimizing the customization and production workflow, this solution helps reduce replacement cost while maintaining a stable delivery cycle of approximately 10 working days, ensuring minimal downtime for retrofit or maintenance projects.
From a performance perspective, the encoder delivers accurate and repeatable absolute position feedback through a stable current-loop interface. It is well suited for applications where analog output is preferred for noise immunity across varying cable lengths. The robust mechanical design and reliable sealing support continuous operation in demanding environments, making this OEM replacement suitable for machinery frameworks, conveyor systems, and medium-duty automation applications requiring dependable analog feedback.
Electrical data
| Parameter | Value |
| Valid for all versions | Unless otherwise stated |
| Sensor system: | GaAIAs diode, photo-transistor array, precision comparator |
| Setting cycles EEPROM: | ≥10^6 |
| Multifunctional inputs (MFP): | Depending on adjusting mode (signal input E6) |
| Memory circuit (latch): | Through MFP |
| Disc coding: | Gray code |
| Signal sense: | CW or CCW (signal input E6) |
| Supply voltage range V_s: | +20 to +26 VDC, 15±0.5VDC(optional) |
| Supply current I_s: | 80 mA typ. / 120 mA max. (when output current = 0) |
| Linearity: | 0.025% typ. / 0.05% max. (+2 LSB), 12 Bit monotory warranted |
| Temperature drift: | 0.0015% / K typ. |
| Current output | |
| Accuracy | |
| at starting point 0 mA: | 0 mA ±5 μA typ. / ±15 μA max. |
| at end point 4 mA: | 4 mA ±5 μA typ. / ±15 μA max. |
| Load resistance: | 0 to 500Ω at V_s = 20 to 26 VDC, 0 to 1000Ω at V_s = 22 to 26 VDC |
| Voltage output | |
| Accuracy | |
| at starting point 0 V: | 0 V ±2.5 mV typ. / ±7.5 mV max. |
| at end point 10 V: | 10 V ±2.5 mV typ. / ±7.5 mV max. |
| Output current: | 5 mA max. When load resistance > 2 kΩ (short circuit proof) |
