This replacement model for the CRF65-4096G4096C24 is engineered to fully retain the original encoder’s mechanical and electrical specifications, including the 4096×4096 multi-turn resolution and parallel output signals. Key structural elements such as the shaft interface, mounting flange, housing dimensions, and connector layout are precisely reproduced, allowing direct installation without any system modification. It is designed to resolve supply chain constraints while delivering stable, high-precision absolute position feedback. The standard production and delivery cycle is 10–15 working days.
This replacement model has been successfully deployed in Southeast Asia, the Middle East, Brazil, Russia, and Ukraine. Users recognize its accurate multi-turn tracking, durable mechanical structure, and consistent long-term performance. It is well suited for CNC machinery, automated assembly lines, wind turbine systems, and other industrial applications where dependable and precise absolute feedback is essential.
Technical data
| Parameter | Value |
| Electrical data (Valid for all versions unless otherwise stated) | |
| Sensor system | GaAlAs diode, photo-transistor array, precision comparator |
| Parallel output circuits | A = Open collector, C = Darlington, D = Push pull |
| Serial outputs | Differential output to RS422 |
| SS/ ASA | Differential (opto-coupler) for data driver RS 422 |
| Parity bit | Check bit (not to RS - 22 Bit) |
| Error bit output | Data Bit (parallel and SS/ 32 Bit only) |
| Enable circuit for bus operation | Active or inactive |
| Multifunctional inputs (MFP) | Signal input 6 |
| Memory circuit (latch) | Through MFP |
| Code sense | CW or CCW |
| Supply voltage range | 11 to 26 VDC |
| Supply current | 80 mA typ. / 120 mA max. |
| Data rate | 1 to 3 kHz, depending on programming (parallel interface only) |
| Measurement position deviation | ≤ ± 238' (for 4096 pos. / 360°) |
| Disc coding | Gray code |
| Setting cycles EEPROM | ≤ 10^6 |
| Mechanical data | |
| Operating speed | 3000 rpm max. (continuous), 4000 rpm max. (short period) |
| Operating torque | 5 Ncm min. (at 1000 rpm) |
| Wind-up torque | ≤ 10 Ncm (4 Ncm - CRF 66) |
| Angular acceleration | 10^6 rad/s^2 max. |
| Inertial mass of rotor | 50 gcm^2 |
| Permissible axial and radial shift load | 250 N max. |
| Bearing life expectancy | 10^6 turns |
