This OEM encoder replacement for the CRF65-4096G4096A10 is designed to fully match the original encoder’s 4096×4096 multi-turn resolution and parallel output characteristics. All mechanical and electrical details—including shaft structure, mounting flange, housing dimensions, installation depth, and connector orientation—are precisely replicated to ensure true plug-and-play compatibility. It provides a reliable OEM-level alternative for applications that require accurate absolute position feedback without any system modification. The standard production lead time is 10–15 working days.
This OEM encoder has been successfully applied in markets such as the Middle East, Southeast Asia, Brazil, Russia, and Ukraine. Users value its stable multi-turn performance, robust mechanical design, and consistent signal output under continuous operation. It is widely used in CNC machinery, automated production lines, wind energy equipment, and material-handling systems, delivering dependable absolute feedback for demanding industrial environments.
Technical data
| Parameter | Value |
| Electrical data (Valid for all versions unless otherwise stated) | |
| Sensor system | GaAlAs diode, photo-transistor array, precision comparator |
| Parallel output circuits | A = Open collector, C = Darlington, D = Push pull |
| Serial outputs | Differential output to RS422 |
| SS/ ASA | Differential (opto-coupler) for data driver RS 422 |
| Parity bit | Check bit (not to RS - 22 Bit) |
| Error bit output | Data Bit (parallel and SS/ 32 Bit only) |
| Enable circuit for bus operation | Active or inactive |
| Multifunctional inputs (MFP) | Signal input 6 |
| Memory circuit (latch) | Through MFP |
| Code sense | CW or CCW |
| Supply voltage range | 11 to 26 VDC |
| Supply current | 80 mA typ. / 120 mA max. |
| Data rate | 1 to 3 kHz, depending on programming (parallel interface only) |
| Measurement position deviation | ≤ ± 238' (for 4096 pos. / 360°) |
| Disc coding | Gray code |
| Setting cycles EEPROM | ≤ 10^6 |
| Mechanical data | |
| Operating speed | 3000 rpm max. (continuous), 4000 rpm max. (short period) |
| Operating torque | 5 Ncm min. (at 1000 rpm) |
| Wind-up torque | ≤ 10 Ncm (4 Ncm - CRF 66) |
| Angular acceleration | 10^6 rad/s^2 max. |
| Inertial mass of rotor | 50 gcm^2 |
| Permissible axial and radial shift load | 250 N max. |
| Bearing life expectancy | 10^6 turns |
