For systems using the 14-14361-4096 model, we provide a customized incremental encoder replacement engineered to ensure compatibility in electrical behavior, output resolution, and mechanical mounting. The replacement solution supports direct installation, avoiding any changes to existing control hardware or software.
This encoder delivers very high-resolution incremental signals, making it suitable for applications that demand precise speed regulation and fine position feedback. It operates on a 10–30 V DC power supply and uses push-pull, short-circuit-protected outputs to maintain signal integrity in industrial environments. With a stainless steel enclosure and IP66 protection, it is well suited for servo drives, precision automation equipment, and high-performance motion control systems exposed to vibration, dust, and moisture.
14-14361：Up to 5000 ppr.ATEX approval.Flameproof enclosure 10 V … 30 V with short-circuit proof push-pull output
Technical Data for Incremental Rotary Encoder 14-14361
General Specifications
Attribute
Details
Detection Type
Photoelectric
Pulse Count Max.
5000 ppr
Operating Voltage (U_B)
10 … 30 V DC
No-load Supply Current (I_0)
max. 80 mA
Output Type
Push-pull, Incremental
Voltage Drop (U_d)
< 4 V
Load Current Max. per Channel
40 mA
Output Frequency Max.
100 kHz
Rise Time
250 ns
De-energized Delay (t_off)
250 ns
Degree of Protection
IP66
Emitted Interference and Noise Immunity
Attribute
Standard
Emitted Interference
EN 61000-6-4:2007/A1:2011
Noise Immunity
EN 61000-6-2:2005
Ambient Conditions
Attribute
Gas Ex-area
Dust Ex-area
Operating Temperature
-40 … 55 °C
-30 … 55 °C
Storage Temperature
-40 … 70 °C
-30 … 70 °C
Mechanical Specifications
Attribute
Details
Material (Housing)
3.1645 aluminum
Material (Flange)
3.1645 aluminum
Shaft Material
Stainless steel 1.4305 / AISI 303
Mass
approx. 3000 g
Rotational Speed
max. 6000 min^-1
Moment of Inertia
400 gcm^2
Starting Torque
< 5 Ncm
Shaft Load
Axial: 60 N, Radial: 80 N
Additional Data
Attribute
Details
EU-Type Examination Certificate
ZELM 02 ATEX 0078 X
Marking
1 II 2G Ex db IIC T6 Gb, 1 II 2D Ex tb IIIC T80°C Db
Directive Conformity
Directive 94/9/EC, EN 60079-0:2012+A11:2013, EN 60079-1:2014, EN 60079-31:2014
