AVS78E-021K5R0GI-0016 Pepperl+Fuchs SSI Singleturn absolute rotary encoder
AVS78E
Up to 16 Bit singleturn/ATEX approval/IECEx approval/Flameproof enclosure
Removable connection cap/Galvanically isolated RS 422 interface
We provide AVS78E-021K5R0GI-0016 encoder replacement solutions, the use of non-standard form for the production of alternative products, the application parameters of all 1:1. Perfect replacement of the prototype encoder, to solve the procurement and other challenges. The picture is the real photo of the replacement solution.
Technical Data for Singleturn Absolute Rotary Encoder AVS78E
General Specifications
| Attribute | Details |
|---|---|
| Detection Type | Photoelectric Sampling |
| Device Type | Singleturn Absolute Rotary Encoder |
| Functional Safety | MTTFd: 210 a, L10: 7.7 E+9 at 3000 rpm |
| Operating Voltage (U_B) | 10 … 30 V DC |
| No-load Supply Current (I_0) | max. 90 mA |
| Linearity | ± 2 LSB at 16 Bit, ± 1 LSB at 13 Bit, ± 0.5 LSB at 12 Bit |
| Output Code | Gray Code, Binary Code |
| Interface Type | SSI (Synchronous Serial Interface) |
| Monoflop Time | 20 ± 10 µs |
| Resolution | Up to 16 Bit Singleturn |
| Transfer Rate | 0.1 … 2 MBit/s |
Standard Conformity
| Attribute | Standard |
|---|---|
| Degree of Protection | DIN EN 60529, IP66 |
| Climatic Testing | DIN EN 60068-2-78, no moisture condensation |
| Emitted Interference | EN 61000-6-4:2007/A1:2011 |
| Noise Immunity | EN 61000-6-2:2005 |
| Shock Resistance | DIN EN 60068-2-27, 100 g, 3 ms |
| Vibration Resistance | DIN EN 60068-2-6, 10 g, 10 … 2000 Hz |
Approvals and Certificates
| Attribute | Details |
|---|---|
| ATEX Approval | Equipment protection level Gb, ITS 15 ATEX 18372X |
| IECEx Approval | Equipment protection level Gb, IECEx ITS 15.0061X |
Ambient Conditions
| Attribute | Range |
|---|---|
| Operating Temperature | -40 … 70 °C (-40 … 158 °F) |
| Storage Temperature | -40 … 85 °C (-40 … 185 °F) |
Mechanical Specifications
| Attribute | Details |
|---|---|
| Material (Housing) | Anodized Aluminum, Stainless Steel 1.4404 / AISI 316L (Inox) |
| Material (Flange) | Anodized Aluminum, Stainless Steel 1.4404 / AISI 316L (Inox) |
| Shaft Material | Stainless Steel 1.4404 / AISI 316L |
| Mass | approx. 2600 g (combination 1), approx. 3900 g (combination 2) |
| Rotational Speed | max. 3000 min^-1 |
| Moment of Inertia | 180 gcm^2 |
| Starting Torque | ≤ 4 Ncm |
| Shaft Load | Axial: 60 N, Radial: 80 N |
Additional Information
| Attribute | Details |
|---|---|
| Material Options | - Housing: Anodized Aluminum - Flange: Anodized Aluminum - Shaft: Stainless Steel 1.4404 / AISI 316L - (Inox) All Stainless Steel |
| Shaft Dimensions | 12 mm x 25 mm with flats at 120° |
| Cable Connection | ∅ 10.2 mm, Radox 9 x 0.5 mm² |
| Terminal Compartment | Options available, see ordering information |
