Posital OCE-EIC1B-1216-W10W-CRW Absolute Encoder | Profinet Replacement Model

We provide OCE-EIC1B-1216-W10W-CRW encoder replacement solutions, the use of non-standard form for the production of alternative products, the application parameters of all 1:1. Perfect replacement of the prototype encoder, to solve the procurement and other challenges.

Posital OCE-EIC1B-1216-W10W-CRW Absolute Encoder | Profinet Replacement Model-EncoderWorks
Posital OCE-EIC1B-1216-W10W-CRW Absolute Encoder | Profinet Replacement Model-EncoderWorks

Interface

InterfaceProfinet
ProfileProfidrive Profile 4.x, Encoder Profile 4.0, 4.1, 4.2
DiagnosticsDifferent faults and warnings for Memory, Temperature, Synchronization, Commissioning diagnostics, Commissioning invalid scaling, Communication, Master’s sign of life
Transmission Rate100 Mbit
Interface Cycle Time≥ 125 µs
Programming FunctionsResolution, time base and filter for velocity, preset, counting direction, IP-Address, Fractional scaling, Encoder parameter control via GSDML or Non-Volatile memory

Outputs

Output DriverEthernet

Electrical Data

Supply Voltage10 – 32 VDC
Current Consumption≤ 250 mA @ 10 V DC, ≤ 100 mA @ 24 V DC
Power Consumption≤ 3 W
Start-Up Time< 15 s
Reverse Polarity ProtectionYes
Short Circuit ProtectionYes
EMC: Emitted InterferenceDIN EN 61000-6-4
EMC: Noise ImmunityDIN EN 61000-6-2
MTTF95 years @ 40 °C

Sensor

TechnologyOptical
Resolution Singleturn16 bit
Resolution Multiturn12 bit
Multiturn TechnologyMechanical Gearing (no Battery)
Accuracy (INL)±0.0220° (14 – 16 bit), ±0.0439° (≤13 bit)
CodeBinary

Environmental Specifications

Protection Class (Shaft)IP66/IP67
Protection Class (Housing)IP66/IP67
Storage Temperature-40 °C (-40 °F) – +85 °C (+185 °F)
Humidity98% RH, no condensation
Max Temperature+70 °C (+158 °F)
Min Temperature-30 °C fixed (-22 °F), -5 °C flexible (+23 °F)

Mechanical Data

Connection Cap MaterialStainless Steel V4A (1.4404; 316 L)
Housing MaterialStainless Steel V4A (1.4404, 316 L)
Housing CoatingNo Coating
Flange TypeSynchro, ø 78 mm, ATEX
Flange MaterialStainless steel V4A (1.4404, 316 L)
Shaft TypeSolid, Single Flat, Length = 20 mm
Shaft Diameterø 10 mm (0.39")
Max. Shaft LoadAxial 50 N, Radial 50 N
Rotor Inertia≤ 35 gcm² [≤ 0.2 oz-in²]
Friction Torque≤ 3 Ncm @ 20 °C (4.2 oz-in @ 68 °F)
Max. Permissible Mechanical Speed≤ 3000 1/min
Shock Resistance≤ 100 g (half sine 11 ms, EN 60068-2-27)
Vibration Resistance≤ 10 g (10 Hz – 2000 Hz, EN 60068-2-6)
Length130 mm (5.12")
Weight3275 g (7.22 lb)

Electrical Connection

Connection OrientationRadial
Minimum Bend Radius50 mm (2") fixed, 100 mm (4") flexing
Connection TypeCable / Connector