We offer fully customizable replacement solutions for the UCE-AV001-0013-E14W-CRW absolute encoder. Our team can customize specifications, performance parameters, and dimensions to ensure compatibility with the original model or surpass its performance while ensuring seamless integration. Customization options include resolution, mechanical dimensions, and environmental protection ratings. As a reliable alternative supplier, we provide professional technical support tailored to your specific application requirements.
Interface
Interface
Analog Voltage
Manual Functions
Start and End point via Cable or Connector
Electrical Data
Supply Voltage
8 – 32 VDC
Current Consumption
Typical 15 mA @24V (no load)
Start-Up Time
<500 ms
Min. Load Resistance
5 kΩ
Analog Accuracy
@ 10 V = ±10 mV (with an ideal power supply)
Linearity
0.15%
Settling Time
32 ms (from min value to max value jump)
Reverse Polarity Protection
Yes
Short Circuit Protection
Yes
EMC: Emitted Interference
DIN EN 61000-6-4
EMC: Noise Immunity
DIN EN 61000-6-2
MTTF
300.9 years @ 40 °C
Sensor
Technology
Magnetic
Resolution Singleturn
13 bit
Resolution Multiturn
0 bit
Accuracy (INL)
±0.0878° (≤ 12 bit)
Sense Signal (Default)
Counterclockwise shaft movement (front view on shaft)
Code
Analog Voltage 0 – 5 V
Minimum Measurement Range
0 – 11.25°
Resolution of Output
Max. 13 bits over entire measuring range (Fractional Turns - Resolution decreases less than 13 bits when measuring range is less than 90 degrees)
Multiturn Range
Singleturn
Environmental Specifications
Protection Class (Shaft)
IP66/IP67
Protection Class (Housing)
IP66/IP67
Humidity
98% RH, no condensation
Max Temperature
+70 °C (+158 °F)
Min Temperature
-30 °C fixed (-22 °F), -5 °C flexible (+23 °F)
Mechanical Data
Connection Cap Material
Stainless Steel V4A (1.4404; 316 L)
Housing Material
Stainless Steel V4A (1.4404, 316 L)
Housing Coating
No Coating
Flange Type
Blind Hollow, ø 78mm ATEX
Flange Material
Stainless steel V4A (1.4404, 316 L)
Shaft Type
Blind Hollow, Depth = 30 mm
Shaft Diameter
ø 14 mm (0.55")
Max. Shaft Load
Axial 60 N, Radial 80 N
Rotor Inertia
≤ 35 gcm² [≤ 0.2 oz-in²]
Friction Torque
≤ 3 Ncm @ 20 °C (4.2 oz-in @ 68 °F)
Max. Permissible Mechanical Speed
≤ 3000 1/min
Shock Resistance
≤ 100 g (half sine 11 ms, EN 60068-2-27)
Vibration Resistance
≤ 10 g (10 Hz – 2000 Hz, EN 60068-2-6)
Length
118 mm (4.65")
Weight
3240 g (7.14 lb)
Maximum Axial / Radial Misalignment
Static ± 0.3 mm /± 0.5 mm; Dynamic ± 0.1 mm /± 0.2 mm
