General specifications
Parameter | Specification |
---|---|
Detection type | photoelectric sampling |
Pulse count | 500 |
Functional safety related parameters
Parameter | Specification |
---|---|
MTTFd | 140 a |
Mission Time (TM) | 20 a |
L10h | 70 E+9 at 6000 rpm |
Diagnostic Coverage (DC) | 0 % |
Electrical specifications
Parameter | Specification |
---|---|
Operating voltage UB | 5 V DC ± 5 % |
No-load supply current IQ | max. 70 mA |
Output
Parameter | Specification |
---|---|
Output type | RS 422, incremental |
Load current | max. per channel 20 mA, conditionally short-circuit proof (not with UB) |
Output frequency | max. 200 kHz |
Rise time | 100 ns |
Standard conformity
Parameter | Specification |
---|---|
Protection degree | DIN EN 60529, IP54 |
Climate testing | DIN EN 60068-2-78, no moisture condensation |
Emitted interference | EN 61000-6-4:2007 |
Noise immunity | EN 61000-6-2:2005 |
Shock resistance | DIN EN 60068-2-27, 100 g, 3 ms |
Vibration resistance | DIN EN 60068-2-6, 10 g, 10 … 2000 Hz |
Ambient conditions
Parameter | Specification |
---|---|
Operating temperature | -5 … 60 °C (23 … 140 °F), movable cable -20 … 60 °C (-4 … 140 °F), fixed cable |
Storage temperature | -40 … 70 °C (-40 … 158 °F) |
Mechanical specifications
Parameter | Specification |
---|---|
Shaft diameter | 12 mm |
Connection | 1 m PVC cable Ø7.8 mm, 6 x 2 x 0.14 mm² with Connector 8-pin, Amphenol, type C 091 A |
Material
Parameter | Specification |
---|---|
Housing | powder coated aluminium |
Flange | 3.1645 aluminium |
Shaft | Stainless steel 1.4305 / AISI 303 |
Mass | approx. 290 g |
Rotational speed | max. 6000 min⁻¹ |
Moment of inertia | ≤ 40 gcm² |
Starting torque | ≤ 1.5 Ncm |
Shaft load | |
Angle offset | 1 ° |
Axial offset | max. 1 mm |