For discontinued or difficult-to-source CE58-1024GB03 parallel absolute encoders, we deliver a fully compatible technical replacement designed for direct industrial integration. The solution precisely matches original mechanical dimensions, shaft tolerances, mounting interfaces, and parallel output specifications. It can be installed into existing systems without modifying control programs or wiring structures, ensuring reduced retrofit cost and uninterrupted equipment operation.
With a standard production cycle of approximately 15 working days, this technical solution effectively addresses urgent spare part demands and supports small-volume non-standard customization. Each encoder undergoes comprehensive signal calibration and environmental reliability testing to guarantee stable performance under continuous industrial workloads. It is widely applied in automation lines, heavy machinery, and motion control systems where accurate parallel absolute feedback and long-term operational stability are essential.
Technical data
| Sensor system | GaAlAs diode, photo-transistor array |
| Parallel outputs circuits A | Open collector Darlington |
| Parallel outputs circuits B | Open collector, TTL compatible |
| Parallel outputs circuits C | Open emitter Darlington |
| Supply voltage range | +10.5 V to 26.5 VDC |
| Supply current | 50 mA |
| Output frequency | 30 kHz max. |
| Measurement position deviation | 10° |
| Disc coding | 10 bit |
| Code sense | Gray code or Gray-Excess (CW or CCW selectable by connecting MSB or LSB) |
| Enable circuit (for bus operation) | Active or inactive (Signal input ET) |
| Operating speed (continuous) | 3000 rpm max. |
| Operating speed (short period) | 4000 rpm max. |
| Inertial mass of rotor | 35 gcm² |
| Operating torque | ≤ 1 Ncm |
| Wind-up torque | ≤ 0.2 Ncm |
| Permissible axial and radial shaft load | 100 N |
| Bearing life expectancy | 10⁸ revolutions |
| Operating temperature range | -5°C to +60°C |
| Storage temperature range | –25°C to +70°C |
| Resistance to shock | 200 m/s², 11 ms |
| Resistance to vibration | 5 Hz ... 1000 Hz; 100 m/s² |
| Protection | IP 65 when used with the supplied connector cover |
| Mass | 240 g |
