DGS60-C1A00100 SiCK Incremental Encoders (Replacement model)
We provide DGS60-C1A00100 encoder replacement solutions, the use of non-standard form for the production of alternative products, the application parameters of all 1:1. Perfect replacement of the prototype encoder, to solve the procurement and other challenges.
SICK-STEGMANN DGS 60 Technical Data
| Technical Data | DGS60 10mm |
|---|---|
| servo | |
| Solid shaft | 6mm |
| Number of lines (Z) per revolution | 00100 to 10,000, see order info |
| Electrical Interface | TTL/RS 422,6-channel |
| HTL/push-pulj -cannel A, B. Z) | |
| Mass | Approx.0.3kg |
| Moment of inertia of the rotor | |
| Servo flange | 13gcm² |
| Face mount flange Measuring step | 25gcm 90/number of lines |
| Reference signal | |
| Number | 1 |
| Position | 90°elect.& logically interlocked with A+B |
| Error limits | |
| 100≤Z<1250 | 45/Z+0.054° |
| 1250<Z≤100００ | 45/Z+0.039° |
| Measuring step deviation | 45/z° |
| Max.output frequency | |
| TTL | 300kHz(600 at>5000 lines) |
| HTL | 200kHz |
| Max. operating speed | |
| with shaft seal | 6,000min⁻¹ |
| without shaft seall | 10,000 min⁻¹ |
| Max.angular acceleratior | 5x10rad/s² |
| Operating torque | |
| with shat seal | 1 Ncm |
| without shaft seal | 0.1 Ncm |
| Start up torque | |
| with shaf seal | 1.5 Ncm |
| without shaft seal | 0.2Ncm |
| Permissible shaft loading | |
| Servo fiange radial/axial | 20N/10N |
| Face mount flange radial/axial | 40N/20N |
| Bearing lifetime | 3.6x 10¹⁰ revolutions |
| Working temperature range | -20...+85℃ |
| Storage temperature range | -30...+85℃ |
| Permissible relative humidity | 90% |
| EMC | |
| Resistance | |
| to shocks | 30/11g/ms |
| to vibration | 20/10.200g/Hz |
| Protection class acc.IEC 60529 | |
| Housing side | IP67 |
| Flange side | IP65 |
| Operating voltage range | |
| Load current TTL/RS 422,4...6V | Max.20mA |
| TTL/RS 422,1....3Vw | Max.20mA |
| HTL/push-pull, 1....30V | Max.60 mA |
| Operating current range at no load | |
| at 24V | 100mA |
| at5V | 120 mA |
