A compatible replacement solution is available for the CBE58-3600EKA01 encoder, designed to support direct integration into existing industrial systems. This alternative follows the original installation dimensions, shaft interface, and electrical parameters, allowing fast replacement without mechanical modification. It is well suited for projects where the original encoder faces long lead times, limited availability, or rising procurement costs, especially in maintenance and retrofit scenarios.
The replacement encoder delivers a stable 3600-pulse output and is optimized for reliable operation in motion control and automation applications. Through flexible non-standard customization, different shaft and cable configurations can be supported even for small batch orders. Compared with traditional sourcing, this solution significantly reduces total cost and shortens delivery time, with a typical lead time of around 15 working days, helping users minimize downtime and improve equipment availability.
Technical data
| Sensor system | GaAlAs diodes, photo-transistor array |
| Resolution | 4096 positions / 360°; 8192 positions / 360° (optional); 3600 positions / 360° (optional) |
| Data Control - Bit (DCB) | Optional at ≤ 4096 positions |
| Disc coding | Gray or Gray - Excess |
| Measuring position deviation | ≤ ± 2'38'' at 4096 positions / 360°; ≤ ± 1'59'' at 8192 positions / 360° |
| Parallel output circuits | A = Open Collector Darlington; C = Open Emitter Darlington; D = Push - pull |
| Output frequency | 10 kHz max. |
| Latch | via signal input E1 |
| Enable circuit | on / off, via signal input E1 |
| Serial output circuit | E = SSI Differential to RS 422 / 485 |
| Output Code | Gray or Gray - Excess for non - binary outputs |
| Code sense | CW or CCW, via signal input E2 |
| Supply voltage range | +11 VDC to +30 VDC |
| Supply current (parallel) | 50 mA typ. / 70 mA max. |
| Supply current (serial SS) | 60 mA typ. / 80 mA max. |
| Operating speed | 3000 rpm max. (continuous); 4000 rpm max. (short period) |
| Angular acceleration | 10⁵ rad/s² max. |
| Inertial mass of rotor | 45 gcm² |
| Operating torque | ≤ 5 Nm (8 Nm - CBE 66) (at 1000 rpm) |
| Wind - up torque | ≤ 1 Nm (4 Nm - CBE 66) |
| Permissible axial and radial shaft load | 250 N max. |
| Bearing life expectancy | 10⁹ turns |
| Mass | 0.5 kg |
