A customized replacement solution is available for DAF65-12B19, developed to match the original electrical behavior and mechanical installation without requiring system modifications. The replacement supports the same 4–20 mA analog output and mounting arrangement, allowing direct integration into existing control systems. By using a targeted customization approach, the solution addresses specific application requirements while avoiding unnecessary design complexity.
From an application perspective, this replacement focuses on cost optimization and lead-time reduction, making it suitable for maintenance and retrofit projects where delivery speed is critical. Typical production and delivery can be completed within approximately 15 working days, and small-batch, non-standard configurations are supported when required. The encoder is suitable for industrial automation systems that rely on stable absolute feedback under continuous operation and demanding environmental conditions.
Reference Images
Electrical data
| Parameter | Value |
| Valid for all versions | Unless otherwise stated |
| Sensor system: | GaAIAs diode, photo-transistor array, precision comparator |
| Setting cycles EEPROM: | ≥10^6 |
| Multifunctional inputs (MFP): | Depending on adjusting mode (signal input E6) |
| Memory circuit (latch): | Through MFP |
| Disc coding: | Gray code |
| Signal sense: | CW or CCW (signal input E6) |
| Supply voltage range V_s: | +20 to +26 VDC, 15±0.5VDC(optional) |
| Supply current I_s: | 80 mA typ. / 120 mA max. (when output current = 0) |
| Linearity: | 0.025% typ. / 0.05% max. (+2 LSB), 12 Bit monotory warranted |
| Temperature drift: | 0.0015% / K typ. |
| Current output | |
| Accuracy | |
| at starting point 0 mA: | 0 mA ±5 μA typ. / ±15 μA max. |
| at end point 4 mA: | 4 mA ±5 μA typ. / ±15 μA max. |
| Load resistance: | 0 to 500Ω at V_s = 20 to 26 VDC, 0 to 1000Ω at V_s = 22 to 26 VDC |
| Voltage output | |
| Accuracy | |
| at starting point 0 V: | 0 V ±2.5 mV typ. / ±7.5 mV max. |
| at end point 10 V: | 10 V ±2.5 mV typ. / ±7.5 mV max. |
| Output current: | 5 mA max. When load resistance > 2 kΩ (short circuit proof) |
