A customized replacement solution is offered for DAF66-12B01, designed to match the original 4–20 mA analog output and mechanical interface for straightforward installation. The replacement is configured according to actual application requirements, allowing it to integrate into existing equipment without changes to wiring, mounting, or control logic.
This solution is developed with a focus on cost efficiency and shortened delivery time, making it suitable for maintenance and OEM support scenarios. Typical lead time is around 15 working days, and small-batch, non-standard customization is supported to address specific project constraints. The encoder provides stable absolute position feedback under vibration, temperature variation, and electrical noise, making it appropriate for conveyors, heavy-duty machinery, and automated processing systems where reliable operation and predictable performance are required.
Reference Images
Electrical data
| Parameter | Value |
| Valid for all versions | Unless otherwise stated |
| Sensor system: | GaAIAs diode, photo-transistor array, precision comparator |
| Setting cycles EEPROM: | ≥10^6 |
| Multifunctional inputs (MFP): | Depending on adjusting mode (signal input E6) |
| Memory circuit (latch): | Through MFP |
| Disc coding: | Gray code |
| Signal sense: | CW or CCW (signal input E6) |
| Supply voltage range V_s: | +20 to +26 VDC, 15±0.5VDC(optional) |
| Supply current I_s: | 80 mA typ. / 120 mA max. (when output current = 0) |
| Linearity: | 0.025% typ. / 0.05% max. (+2 LSB), 12 Bit monotory warranted |
| Temperature drift: | 0.0015% / K typ. |
| Current output | |
| Accuracy | |
| at starting point 0 mA: | 0 mA ±5 μA typ. / ±15 μA max. |
| at end point 4 mA: | 4 mA ±5 μA typ. / ±15 μA max. |
| Load resistance: | 0 to 500Ω at V_s = 20 to 26 VDC, 0 to 1000Ω at V_s = 22 to 26 VDC |
| Voltage output | |
| Accuracy | |
| at starting point 0 V: | 0 V ±2.5 mV typ. / ±7.5 mV max. |
| at end point 10 V: | 10 V ±2.5 mV typ. / ±7.5 mV max. |
| Output current: | 5 mA max. When load resistance > 2 kΩ (short circuit proof) |
