The CRF58-4096G4096A01 Replacement Solution is developed as a high-accuracy parallel encoder alternative, precisely matching the original 4096×4096 multi-turn resolution and parallel output interface. All critical mechanical and electrical elements—including shaft design, flange dimensions, housing profile, and signal definition—are carefully replicated to support true plug-and-play installation. This solution helps users reduce sourcing risk, control replacement cost, and maintain continuous absolute position feedback without redesigning existing systems. Standard production lead time is 10–15 working days.
This replacement solution has been delivered to industrial users in Southeast Asia, the Middle East, Russia, Brazil, and Ukraine. Customers highlight its stable multi-turn accuracy, strong mechanical durability, and reliable long-term operation. It is well suited for automation equipment, material-handling systems, energy installations, and other industrial applications where dependable absolute feedback and fast availability are essential.
Technical data
| Parameter | Value |
| Electrical data (Valid for all versions unless otherwise stated) | |
| Sensor system | GaAlAs diode, photo-transistor array, precision comparator |
| Parallel output circuits | A = Open collector, C = Darlington, D = Push pull |
| Serial outputs | Differential output to RS422 |
| SS/ ASA | Differential (opto-coupler) for data driver RS 422 |
| Parity bit | Check bit (not to RS - 22 Bit) |
| Error bit output | Data Bit (parallel and SS/ 32 Bit only) |
| Enable circuit for bus operation | Active or inactive |
| Multifunctional inputs (MFP) | Signal input 6 |
| Memory circuit (latch) | Through MFP |
| Code sense | CW or CCW |
| Supply voltage range | 11 to 26 VDC |
| Supply current | 80 mA typ. / 120 mA max. |
| Data rate | 1 to 3 kHz, depending on programming (parallel interface only) |
| Measurement position deviation | ≤ ± 238' (for 4096 pos. / 360°) |
| Disc coding | Gray code |
| Setting cycles EEPROM | ≤ 10^6 |
| Mechanical data | |
| Operating speed | 3000 rpm max. (continuous), 4000 rpm max. (short period) |
| Operating torque | 5 Ncm min. (at 1000 rpm) |
| Wind-up torque | ≤ 10 Ncm (4 Ncm - CRF 66) |
| Angular acceleration | 10^6 rad/s^2 max. |
| Inertial mass of rotor | 50 gcm^2 |
| Permissible axial and radial shift load | 250 N max. |
| Bearing life expectancy | 10^6 turns |
