The CRF58-4096G4096C21 Custom Replacement is engineered as a precise alternative to the original parallel absolute encoder, fully maintaining the 4096×4096 multi-turn resolution and parallel signal structure. All mechanical and electrical details—including shaft interface, housing dimensions, mounting geometry, and output definition—are accurately reproduced to ensure direct installation without system changes. This customized solution helps users lower replacement cost, shorten procurement cycles, and secure a stable long-term supply. Typical production lead time is 10–15 working days.
This custom replacement has been deployed in industrial environments across Southeast Asia, the Middle East, Russia, Brazil, and Ukraine. Users report consistent multi-turn accuracy, strong mechanical durability, and reliable long-term operation. It is well suited for CNC equipment, automated production lines, lifting systems, and wind energy applications where dependable absolute position feedback is critical.
Technical data
| Parameter | Value |
| Electrical data (Valid for all versions unless otherwise stated) | |
| Sensor system | GaAlAs diode, photo-transistor array, precision comparator |
| Parallel output circuits | A = Open collector, C = Darlington, D = Push pull |
| Serial outputs | Differential output to RS422 |
| SS/ ASA | Differential (opto-coupler) for data driver RS 422 |
| Parity bit | Check bit (not to RS - 22 Bit) |
| Error bit output | Data Bit (parallel and SS/ 32 Bit only) |
| Enable circuit for bus operation | Active or inactive |
| Multifunctional inputs (MFP) | Signal input 6 |
| Memory circuit (latch) | Through MFP |
| Code sense | CW or CCW |
| Supply voltage range | 11 to 26 VDC |
| Supply current | 80 mA typ. / 120 mA max. |
| Data rate | 1 to 3 kHz, depending on programming (parallel interface only) |
| Measurement position deviation | ≤ ± 238' (for 4096 pos. / 360°) |
| Disc coding | Gray code |
| Setting cycles EEPROM | ≤ 10^6 |
| Mechanical data | |
| Operating speed | 3000 rpm max. (continuous), 4000 rpm max. (short period) |
| Operating torque | 5 Ncm min. (at 1000 rpm) |
| Wind-up torque | ≤ 10 Ncm (4 Ncm - CRF 66) |
| Angular acceleration | 10^6 rad/s^2 max. |
| Inertial mass of rotor | 50 gcm^2 |
| Permissible axial and radial shift load | 250 N max. |
| Bearing life expectancy | 10^6 turns |
