The CRF65-4096G4096A01 Replacement Model is developed as a true 1:1 parallel absolute encoder alternative, fully reproducing the original 4096×4096 multi-turn resolution and parallel signal behavior. All mechanical and electrical elements—including shaft dimensions, housing structure, flange interface, and output characteristics—are precisely matched to ensure direct installation without system changes. This replacement helps users reduce dependency on original supply channels while maintaining stable and accurate absolute position feedback. Standard production lead time is 10–15 working days, supporting fast maintenance and retrofit requirements.
This replacement model has been deployed across the Middle East, Southeast Asia, Brazil, Russia, and Ukraine. Users value its consistent multi-turn accuracy, solid mechanical durability, and reliable long-term performance. It is well suited for industrial automation, heavy machinery, and energy-related equipment where dependable absolute feedback is critical for continuous operation.
Technical data
| Parameter | Value |
| Electrical data (Valid for all versions unless otherwise stated) | |
| Sensor system | GaAlAs diode, photo-transistor array, precision comparator |
| Parallel output circuits | A = Open collector, C = Darlington, D = Push pull |
| Serial outputs | Differential output to RS422 |
| SS/ ASA | Differential (opto-coupler) for data driver RS 422 |
| Parity bit | Check bit (not to RS - 22 Bit) |
| Error bit output | Data Bit (parallel and SS/ 32 Bit only) |
| Enable circuit for bus operation | Active or inactive |
| Multifunctional inputs (MFP) | Signal input 6 |
| Memory circuit (latch) | Through MFP |
| Code sense | CW or CCW |
| Supply voltage range | 11 to 26 VDC |
| Supply current | 80 mA typ. / 120 mA max. |
| Data rate | 1 to 3 kHz, depending on programming (parallel interface only) |
| Measurement position deviation | ≤ ± 238' (for 4096 pos. / 360°) |
| Disc coding | Gray code |
| Setting cycles EEPROM | ≤ 10^6 |
| Mechanical data | |
| Operating speed | 3000 rpm max. (continuous), 4000 rpm max. (short period) |
| Operating torque | 5 Ncm min. (at 1000 rpm) |
| Wind-up torque | ≤ 10 Ncm (4 Ncm - CRF 66) |
| Angular acceleration | 10^6 rad/s^2 max. |
| Inertial mass of rotor | 50 gcm^2 |
| Permissible axial and radial shift load | 250 N max. |
| Bearing life expectancy | 10^6 turns |
