For systems using the 14-14361-360 model, we provide a customized incremental encoder replacement solution developed to match the original in electrical behavior, pulse output, and mechanical fit. The replacement encoder is designed for direct installation, ensuring compatibility with existing control hardware and software.
This encoder delivers medium-resolution incremental feedback, supporting accurate speed measurement and position tracking in industrial motion applications. It operates within a 10–30 V DC power range and utilizes push-pull, short-circuit-protected outputs for stable signal transmission. With a robust stainless steel housing and IP66-rated protection, this replacement is well suited for automation machinery, conveyor systems, and motor feedback applications operating in harsh industrial environments.
14-14361：Up to 5000 ppr.ATEX approval.Flameproof enclosure 10 V … 30 V with short-circuit proof push-pull output
We provide 14-14361-360 encoder replacement solutions, the use of non-standard form for the production of alternative products, the application parameters of all 1:1. Perfect replacement of the prototype encoder, to solve the procurement and other challenges. The picture is the real photo of the replacement solution.
Technical Data for Incremental Rotary Encoder 14-14361
General Specifications
Attribute
Details
Detection Type
Photoelectric
Pulse Count Max.
5000 ppr
Operating Voltage (U_B)
10 … 30 V DC
No-load Supply Current (I_0)
max. 80 mA
Output Type
Push-pull, Incremental
Voltage Drop (U_d)
< 4 V
Load Current Max. per Channel
40 mA
Output Frequency Max.
100 kHz
Rise Time
250 ns
De-energized Delay (t_off)
250 ns
Degree of Protection
IP66
Emitted Interference and Noise Immunity
Attribute
Standard
Emitted Interference
EN 61000-6-4:2007/A1:2011
Noise Immunity
EN 61000-6-2:2005
Ambient Conditions
Attribute
Gas Ex-area
Dust Ex-area
Operating Temperature
-40 … 55 °C
-30 … 55 °C
Storage Temperature
-40 … 70 °C
-30 … 70 °C
Mechanical Specifications
Attribute
Details
Material (Housing)
3.1645 aluminum
Material (Flange)
3.1645 aluminum
Shaft Material
Stainless steel 1.4305 / AISI 303
Mass
approx. 3000 g
Rotational Speed
max. 6000 min^-1
Moment of Inertia
400 gcm^2
Starting Torque
< 5 Ncm
Shaft Load
Axial: 60 N, Radial: 80 N
Additional Data
Attribute
Details
EU-Type Examination Certificate
ZELM 02 ATEX 0078 X
Marking
1 II 2G Ex db IIC T6 Gb, 1 II 2D Ex tb IIIC T80°C Db
Directive Conformity
Directive 94/9/EC, EN 60079-0:2012+A11:2013, EN 60079-1:2014, EN 60079-31:2014
