The CRF65-4096G4096C25 Replacement Model is engineered as a high-compatibility parallel encoder alternative, precisely matching the original 4096×4096 multi-turn resolution and parallel signal structure. All essential mechanical and electrical details—including shaft interface, flange size, housing dimensions, mounting depth, and output configuration—are faithfully reproduced to ensure direct installation without any system changes. This solution is designed for users who need a stable and readily available replacement to maintain accurate absolute position feedback. Standard production lead time is 10–15 working days.
This replacement model has been supplied to customers in Southeast Asia, the Middle East, Brazil, Russia, and Ukraine. End users highlight its reliable multi-turn accuracy, robust mechanical construction, and consistent long-term performance. It is well suited for industrial automation systems, heavy machinery, energy equipment, and automated assembly lines, where dependable absolute feedback and operational continuity are critical.
Technical data
| Parameter | Value |
| Electrical data (Valid for all versions unless otherwise stated) | |
| Sensor system | GaAlAs diode, photo-transistor array, precision comparator |
| Parallel output circuits | A = Open collector, C = Darlington, D = Push pull |
| Serial outputs | Differential output to RS422 |
| SS/ ASA | Differential (opto-coupler) for data driver RS 422 |
| Parity bit | Check bit (not to RS - 22 Bit) |
| Error bit output | Data Bit (parallel and SS/ 32 Bit only) |
| Enable circuit for bus operation | Active or inactive |
| Multifunctional inputs (MFP) | Signal input 6 |
| Memory circuit (latch) | Through MFP |
| Code sense | CW or CCW |
| Supply voltage range | 11 to 26 VDC |
| Supply current | 80 mA typ. / 120 mA max. |
| Data rate | 1 to 3 kHz, depending on programming (parallel interface only) |
| Measurement position deviation | ≤ ± 238' (for 4096 pos. / 360°) |
| Disc coding | Gray code |
| Setting cycles EEPROM | ≤ 10^6 |
| Mechanical data | |
| Operating speed | 3000 rpm max. (continuous), 4000 rpm max. (short period) |
| Operating torque | 5 Ncm min. (at 1000 rpm) |
| Wind-up torque | ≤ 10 Ncm (4 Ncm - CRF 66) |
| Angular acceleration | 10^6 rad/s^2 max. |
| Inertial mass of rotor | 50 gcm^2 |
| Permissible axial and radial shift load | 250 N max. |
| Bearing life expectancy | 10^6 turns |
