The CRF65-4096G4096C08 Custom Replacement is developed as a precise alternative to the original parallel absolute encoder, fully matching the 4096×4096 multi-turn resolution and signal behavior. Mechanical specifications such as housing size, shaft structure, mounting interface, and connector orientation are accurately replicated to ensure true plug-and-play installation. This customized solution helps users reduce replacement cost and avoid long procurement cycles, while maintaining stable system performance. Typical production lead time is 10–15 working days, supporting fast maintenance and retrofit needs.
This custom replacement has been supplied to multiple international markets, including Southeast Asia, the Middle East, Brazil, Russia, and Ukraine. Users value its reliable multi-turn feedback, strong mechanical durability, and consistent long-term accuracy. It is well suited for CNC equipment, automated production lines, wind energy systems, and material-handling machinery where dependable absolute position feedback is required.
Technical data
| Parameter | Value |
| Electrical data (Valid for all versions unless otherwise stated) | |
| Sensor system | GaAlAs diode, photo-transistor array, precision comparator |
| Parallel output circuits | A = Open collector, C = Darlington, D = Push pull |
| Serial outputs | Differential output to RS422 |
| SS/ ASA | Differential (opto-coupler) for data driver RS 422 |
| Parity bit | Check bit (not to RS - 22 Bit) |
| Error bit output | Data Bit (parallel and SS/ 32 Bit only) |
| Enable circuit for bus operation | Active or inactive |
| Multifunctional inputs (MFP) | Signal input 6 |
| Memory circuit (latch) | Through MFP |
| Code sense | CW or CCW |
| Supply voltage range | 11 to 26 VDC |
| Supply current | 80 mA typ. / 120 mA max. |
| Data rate | 1 to 3 kHz, depending on programming (parallel interface only) |
| Measurement position deviation | ≤ ± 238' (for 4096 pos. / 360°) |
| Disc coding | Gray code |
| Setting cycles EEPROM | ≤ 10^6 |
| Mechanical data | |
| Operating speed | 3000 rpm max. (continuous), 4000 rpm max. (short period) |
| Operating torque | 5 Ncm min. (at 1000 rpm) |
| Wind-up torque | ≤ 10 Ncm (4 Ncm - CRF 66) |
| Angular acceleration | 10^6 rad/s^2 max. |
| Inertial mass of rotor | 50 gcm^2 |
| Permissible axial and radial shift load | 250 N max. |
| Bearing life expectancy | 10^6 turns |
