The CRF65-4096G4096C02 OEM Encoder is designed as a direct OEM-level replacement, fully matching the original unit’s 4096×4096 multi-turn resolution and parallel output characteristics. All mechanical and electrical details—including flange design, shaft interface, housing dimensions, and connector layout—are reproduced to ensure seamless plug-and-play installation. This solution helps manufacturers and maintenance teams reduce downtime, control replacement costs, and avoid long sourcing cycles. The standard production lead time is 10–15 working days.
This OEM encoder has been delivered to customers across Southeast Asia, the Middle East, Brazil, Russia, and Ukraine. Users report stable multi-turn accuracy, reliable long-term operation, and strong mechanical durability under continuous industrial use. It is well suited for CNC machines, automated production lines, lifting equipment, and energy-related systems where precise absolute feedback and consistent performance are essential.
Technical data
| Parameter | Value |
| Electrical data (Valid for all versions unless otherwise stated) | |
| Sensor system | GaAlAs diode, photo-transistor array, precision comparator |
| Parallel output circuits | A = Open collector, C = Darlington, D = Push pull |
| Serial outputs | Differential output to RS422 |
| SS/ ASA | Differential (opto-coupler) for data driver RS 422 |
| Parity bit | Check bit (not to RS - 22 Bit) |
| Error bit output | Data Bit (parallel and SS/ 32 Bit only) |
| Enable circuit for bus operation | Active or inactive |
| Multifunctional inputs (MFP) | Signal input 6 |
| Memory circuit (latch) | Through MFP |
| Code sense | CW or CCW |
| Supply voltage range | 11 to 26 VDC |
| Supply current | 80 mA typ. / 120 mA max. |
| Data rate | 1 to 3 kHz, depending on programming (parallel interface only) |
| Measurement position deviation | ≤ ± 238' (for 4096 pos. / 360°) |
| Disc coding | Gray code |
| Setting cycles EEPROM | ≤ 10^6 |
| Mechanical data | |
| Operating speed | 3000 rpm max. (continuous), 4000 rpm max. (short period) |
| Operating torque | 5 Ncm min. (at 1000 rpm) |
| Wind-up torque | ≤ 10 Ncm (4 Ncm - CRF 66) |
| Angular acceleration | 10^6 rad/s^2 max. |
| Inertial mass of rotor | 50 gcm^2 |
| Permissible axial and radial shift load | 250 N max. |
| Bearing life expectancy | 10^6 turns |
