We supply an OEM-level customized encoder replacement for the CRF58-4096G4096E23, developed to achieve full compatibility with the original SSI absolute encoder. The design accurately reproduces the mounting geometry, shaft interface, housing dimensions, SSI communication structure, and 4096×4096 multi-turn resolution. This ensures seamless integration with existing PLCs, drives, and control systems, allowing direct installation without software changes or mechanical adaptation. The solution is intended for users facing original product shortages or requiring a stable, long-term OEM supply alternative.
Since its introduction, this OEM encoder has been adopted by customers in Russia, the Middle East, Indonesia, Ukraine, Brazil, and other regions. Users value its stable signal transmission, reliable absolute feedback, and balanced cost structure. With a consistent production lead time of approximately 15 working days, it has become a dependable drop-in option for heavy-duty industrial applications that demand durable construction and precise SSI position feedback.
Technical data
| Parameter | Value |
| Electrical data (Valid for all versions unless otherwise stated) | |
| Sensor system | GaAlAs diode, photo-transistor array, precision comparator |
| Parallel output circuits | A = Open collector, C = Darlington, D = Push pull |
| Serial outputs | Differential output to RS422 |
| SS/ ASA | Differential (opto-coupler) for data driver RS 422 |
| Parity bit | Check bit (not to RS - 22 Bit) |
| Error bit output | Data Bit (parallel and SS/ 32 Bit only) |
| Enable circuit for bus operation | Active or inactive |
| Multifunctional inputs (MFP) | Signal input 6 |
| Memory circuit (latch) | Through MFP |
| Code sense | CW or CCW |
| Supply voltage range | 11 to 26 VDC |
| Supply current | 80 mA typ. / 120 mA max. |
| Data rate | 1 to 3 kHz, depending on programming (parallel interface only) |
| Measurement position deviation | ≤ ± 238' (for 4096 pos. / 360°) |
| Disc coding | Gray code |
| Setting cycles EEPROM | ≤ 10^6 |
| Mechanical data | |
| Operating speed | 3000 rpm max. (continuous), 4000 rpm max. (short period) |
| Operating torque | 5 Ncm min. (at 1000 rpm) |
| Wind-up torque | ≤ 10 Ncm (4 Ncm - CRF 66) |
| Angular acceleration | 10^6 rad/s^2 max. |
| Inertial mass of rotor | 50 gcm^2 |
| Permissible axial and radial shift load | 250 N max. |
| Bearing life expectancy | 10^6 turns |
