We provide fully customizable replacement solutions for the OCD-EEC1B-0013-B15V-PRM absolute encoder. Our team can tailor specifications, performance parameters, and physical dimensions to ensure full compatibility with the original encoder or even exceed its performance, while guaranteeing seamless integration into your system. Customization covers resolution, mechanical size, and environmental protection ratings, among other aspects. As a trusted alternative supplier, we deliver dedicated technical support designed to meet your specific application needs.
Interface
Interface
EtherNet/IP
Profile
CIP (Common Industrial Protocol)
Diagnostics
Error and Warning Bits
Features
Boot-Loader, Round Axis, DLR, Velocity, Acceleration and Temperature values
Transmission Rate
100 Mbit
Interface Cycle Time
≥ 1 ms
Programming Functions
Resolution, time base and filter for velocity, preset, counting direction, parameter control priority, IP-Address
Outputs
Output Driver
Ethernet
Electrical Data
Supply Voltage
10 – 30 VDC
Current Consumption
≤ 250 mA @ 10 V DC, ≤ 100 mA @ 24 V DC
Power Consumption
≤ 3 W
Start-Up Time
< 15 s
Reverse Polarity Protection
Yes
Short Circuit Protection
Yes
EMC: Emitted Interference
DIN EN 61000-6-4
EMC: Noise Immunity
DIN EN 61000-6-2
MTTF
95 years @ 40 °C
Sensor
Technology
Optical
Resolution Singleturn
13 bit
Accuracy (INL)
±0.0220° (14 – 16 bit), ±0.0439° (≤13 bit)
Code
Binary
Environmental Specifications
Protection Class (Shaft)
IP66/IP67
Protection Class (Housing)
IP66/IP67
Min Temperature
-40 °C (-40 °F)
Max Temperature
+85 °C (+185 °F)
Storage Temperature
-40 °C (-40 °F) – +85 °C (+185 °F)
Humidity
98% RH, no condensation
Mechanical Data
Housing Material
Stainless Steel V2A (1.4305, 303)
Housing Coating
No Coating
Flange Type
Blind Hollow, ø 58 mm (B)
Flange Material
Stainless steel V2A (1.4305; 303)
Shaft Type
Blind Hollow, Depth = 30 mm
Shaft Diameter
ø 15 mm (0.59")
Shaft Material
Stainless Steel V2A (1.4305, 303)
Rotor Inertia
≤ 30 gcm² [≤ 0.17 oz-in²]
Friction Torque
≤ 5 Ncm @ 20 °C, (7.1 oz-in @ 68 °F)
Max. Permissible Mechanical Speed
≤ 3000 1/min
Shock Resistance
≤ 100 g (half sine 6 ms, EN 60068-2-27)
Permanent Shock Resistance
≤ 10 g (half sine 16 ms, EN 60068-2-29)
Vibration Resistance
≤ 10 g (10 Hz – 1000 Hz, EN 60068-2-6)
Length
87,5 mm (3.44")
Weight
840 g (1.85 lb)
Maximum Axial / Radial Misalignment
Static ± 0.3 mm /± 0.5 mm; Dynamic ± 0.1 mm /± 0.2 mm
